Table of Contents
Advertisement
Keep WAN
Connection
WAN physical type
WAN IP Network
Settings
22
Normally, this function is designed for Dynamic IP environments
because some ISPs will drop connections if there is no traffic
within certain periods of time. Check Enable PING to keep alive
box to activate this function.
PING to the IP - If you enable the PING function, please specify
the IP address for the system to PING it for keeping alive.
PING Interval - Enter the interval for the system to execute the
PING operation.
Check and choose a proper type used for duplex between this device
and other router that you want to communicate. Both sides should
use the same physical type; otherwise, the connection might be
failed due to inconsistent type. It is recommended for you to set
Auto negotiation as the physical type.
This group allows you to obtain an IP address automatically and
allows you type in IP address manually.
Obtain an IP address automatically – Click this button to obtain
the IP address automatically if you want to use Dynamic IP mode.
Router Name – Type in the router name provided by ISP.
Domain Name – Type in the domain name that you have assigned.
Default MAC Address – Click this radio button to use default MAC
address for the router.
Specify a MAC Address - Some Cable service providers specify a
specific MAC address for access authentication. In such cases you
need to click the Specify a MAC Address and enter the MAC
address in the MAC Address field.
WAN IP Alias - If you have multiple public IP addresses and would
like to utilize them on the WAN interface, please use WAN IP Alias.
You can set up to 8 public IP addresses other than the current one
you are using. After finishing all the settings here, please click OK
to activate them.
Vigor2100 Series User's Guide
Advertisement
Table of Contents
