Table of Contents
Advertisement
3
.
7
.
4
A
c
c
e
s
s
3
.
7
.
4
A
c
c
e
s
s
For additional security of wireless access, the Access Control facility allows you to restrict
the network access right by controlling the wireless LAN MAC address of client. Only the
valid MAC address that has been configured can access the wireless LAN interface. By
clicking the Access Control, a new web page will appear, as depicted below, so that you
could edit the clients' MAC addresses to control their access rights.
Enable Access Control Select to enable the MAC Address access control feature.
Policy
Client's MAC Address Manually enter the MAC address of wireless client.
s
Add
74
For key length 128 bits - For 128 bits WEP key, either 13 ASCII
characters, such as ABCDEFGHIJKLM. (or 26 hexadecimal digits
leading by 0x, such as 0x4142434445464748494A4B4C4D)
All wireless devices must support the same WEP encryption bit size
and have the same key. Four keys can be entered here, but only one
key can be selected at a time. The keys can be entered in ASCII or
Hexadecimal. Check the key you wish to use.
C
o
n
t
r
o
l
C
o
n
t
r
o
l
Select to enable any one of the following policy. Choose Activate
MAC address filter to type in the MAC addresses for other clients
in the network manually. Choose Isolate WLAN from LAN will
separate all the WLAN stations from LAN based on the MAC
Address list.
Check this box to isolate the stations from LAN.
Add a new MAC address into the list.
Vigor2100 Series User's Guide
Advertisement
Table of Contents
