Sharing a Printer
A USB printer attached to the AirStation can be made available to the network for wireless printing. You will need to
download and install the Network USB Navigator application from the Buffalo website.
Before proceeding, make sure the printer is installed on your PC with the correct printer drivers/software. If the PC does
not have the required drivers, even if Network USB Navigator detects the printer you will not be able to print to the
device.
Enabling Network USB on the AirStation
1
Open the AirStation's Settings page and navigate to Applications - Network USB.
2
Enable Network USB. If the printer has multiple functions (e.g. scanning), enable Use Multifunction Printer as well.
Installing and Using Network USB Navigator
1
Download the Network USB Navigator software from the Buffalo website.
2
Open the application and install it on your PC, following the directions on the screen.
3
Connect the USB printer to the AirStation. Make sure the printer is powered on.
4
Open Network USB Navigator. The printer should appear as a network device.
5
Select the printer and click Connect.
The printer should now be connected and available for wireless printing over the network.
92