Buffalo AirStation WZR-1750DHP User Manual page 11

4
USB LED (Blue)
On:
A USB drive is connected.
Blinking:
The USB drive can be removed.
Note: When this LED is blinking, the connected USB drive cannot be used. Remove the connected USB drive. If the
LED continues to blink even after the USB drive is removed, restart the AirStation. Do not remove the USB drive or
turn off the AirStation while the USB LED is on.
5
USB 3.0 Port
You can connect any USB 3.0 compatible devices (such as USB storage). Use the cable attached to the USB 3.0
device to connect.
6
USB 2.0 Port
You can connect any USB 2.0 compatible devices (such as USB printers).
7
LAN Port
Connect your computer, hub, or other Ethernet devices to these ports. This switching hub supports 10 Mbps, 100
Mbps, and 1000 Mbps connections.
8
LAN LED (Green)
On:
An Ethernet device is connected.
Blinking:
An Ethernet device is communicating.
9
Internet Port
10 Mbps, 100 Mbps, and 1000 Mbps connections are supported.
Note: In wireless bridge mode or access point mode, the Internet port becomes a regular LAN port, for a total of 5
usable LAN ports.
10
Internet LED (Green)
On:
The Internet port is connected.
Blinking:
The Internet port is transmitting data.
11
Power button
This button turns the power on and off.
It may take 20 to 30 seconds to complete shutdown.
12
DC connector
Connect the included AC adapter here.
11