Buffalo AirStation WZR-1750DHP User Manual page 9

1
AOSS button
To initiate AOSS, hold down this button until the wireless LED flashes (about 1 second). Then, push or click the
AOSS button on your wireless client device to complete the connection. Both devices must be powered on for this
to work.
2
Wireless LED
(Access point/wireless bridge control switch set to "AP")
On:
Wireless LAN is enabled or transmitting.
Double blinks:
AirStation is waiting for an AOSS or WPS security key.
Continuously blinking:
AOSS/WPS error; failed to exchange security keys.
Off:
Wireless LAN is disabled.
(Access point/wireless bridge control switch set to "WB")
On:
Wireless LAN is enabled or transmitting.
Blinking:
Wireless LAN is enabled but not connected.
Off:
Wireless LAN is disabled.
Note: The wireless LED will be blue for 5 GHz wireless connections or amber for 2.4 GHz wireless connections.
3
Internet access LED (Blue)
On:
Internet access is available.
Off:
Internet access is not available.
Router functionality is disabled.
4
Router LED (Blue)
On:
Router functionality is enabled.
Off:
Router functionality is disabled.
5
Buffalo LED (White or Red)
On (White):
Power is on.
Off:
Power is off.
On (Red)*:
Booting.
2 blinks (Red)**:
Flash ROM error.
3 blinks (Red)**:
Wired Ethernet LAN error.
4 blinks (Red)**:
Wireless LAN error.
5 blinks (Red)***:
9