Using Airstations With 2Wire Residential Gateways; How To Use Qos; Setting A Qos Priority Policy - Buffalo AirStation WZR-1750DHP User Manual

4
Click Add.
The user will appear under the PPTP User List section. You can click Edit to modify the user or click Delete to remove the
entry.

Using AirStations with 2Wire Residential Gateways

AT&T Internet services (U-verse or ADSL) will often assign a 2Wire residential gateway device that serves as both the
modem and the router. To add an AirStation to this network, it is best to add the unit as a client device. This way the
AirStation will not conflict with the existing residential gateway settings such as the firewall or port forwarding.
If you would like to set the 2Wire access point as the client device, or you need more information on its settings, contact
AT&T technical support.

How to Use QoS

QoS (quality of service) is a feature that allows the AirStation to prioritize traffic by type. QoS applies to both upstream
and downstream data flow, and ensures consistent performance when using certain high-traffic applications, such as
video streaming.
The higher the priority, the higher the allocated bandwidth will be. For example, if Video is selected, streaming video will
be given the highest bandwidth priority.

Setting a QoS Priority Policy

When setting a custom policy, select the type of traffic to be given the highest priority and lower the priority of other
traffic types accordingly.
1
Open the AirStation's Settings page.
2
Navigate to Applications - QoS.
120