Nat; Lan - Buffalo AirStation WZR-1750DHP User Manual

NAT

Configure network address translation settings here. This enables LAN-side devices to communicate with the Internet.
Internet - NAT (Router Mode Only)
Address Translation

LAN

Configure LAN-side and DHCP server settings.
LAN - LAN
LAN-side IP Address
DHCP Server
DHCP IP Address Pool
LAN-side IP Address (For
IP Unnumbered)
Advanced Settings
Lease Period
Default Gateway
DNS Servers
WINS Server
Enable to use network address translation.
By default, the LAN-side IP address is 192.168.11.1 with subnet mask 255.255.255.0. You
may change it here.
Enable or disable the DHCP server, which assigns LAN-side IP addresses automatically.
Configure the range of IP addresses to be assigned by the DHCP server and IP addresses
to be excluded from that range. Values from 1-256 may be entered.
Set an IP unnumbered LAN-side IP address.
Note: A PC with a normal LAN-side IP address and a PC with an IP unnumbered IP
address cannot communicate each other.
Check Display to display DHCP server advanced settings options.
Set the effective period for IP addresses assigned by the DHCP server. Up to 999 hours
may be entered.
Set the default gateway IP address for the DHCP server to issue to clients.
Set the DNS server IP address for the DHCP server to issue to clients.
Set the WINS server IP address for the DHCP server to issue to clients.
30