Adding an AirStation to an Existing Wireless Network as a
Client
In a network that already has a wireless access point, the AirStation can serve as a wireless client. It can connect
wirelessly to the existing wireless network and other devices can be connected to its Ethernet ports.
To configure the AirStation as a wireless client, navigate to Wireless > Wireless Bridge in Settings.
Under "Manual Connection", click Configure.
Select your access point from the list of detected wireless devices. Select settings for "Wireless Authentication" and
"Encryption" to match the AP's settings, then click OK. The AirStation is now connected as a wireless client, and Ethernet
devices connected to it can use the AP's Internet connection.
66