Cisco ASA 5505 Hardware Installation Manual page 7

About This Guide
•
•
•
•
•
•
•
•
•
•
•
•
•
Power Supply Disconnection Warning
Before working on a chassis or working near power supplies, unplug the power cord on AC units;
Warning
disconnect the power at the circuit breaker on DC units. Statement 12
Jewelry Removal Warning
Before working on equipment that is connected to power lines, remove jewelry (including rings,
Warning
necklaces, and watches). Metal objects will heat up when connected to power and ground and can
cause serious burns or weld the metal object to the terminals. Statement 43
Wrist Strap Warning
During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly
Warning
touch the backplane with your hand or any metal tool, or you could shock yourself. Statement 94
Work During Lightning Activity Warning
Do not work on the system or connect or disconnect cables during periods of lightning activity.
Warning
Statement 1001
Installation Instructions Warning
Read the installation instructions before connecting the system to the power source. Statement 1004
Warning
OL-18362-01
Blank Faceplates and Cover Panels Warning, page viii
Product Disposal Warning, page viii
Short-Circuit Protection Warning, page ix
Compliance with Local and National Electrical Codes Warning, page ix
DC Power Connection Warning, page ix
AC Power Disconnection Warning, page ix
TN Power Warning, page ix
48 VDC Power System, page ix
Multiple Power Cord, page ix
Circuit Breaker (15A) Warning, page ix
Grounded Equipment Warning, page x
Safety Cover Requirement, page x
Faceplates and Cover Panel Requirement, page x
Cisco ASA 5505 Adaptive Security Appliance Hardware Installation Guide
vii