Cisco ASA 5505 Hardware Installation Manual page 47

Appendix 1 Cable Pinouts
To identify the RJ-45 cable type, hold the two ends of the cable next to each other so that you can see
the colored wires inside the ends, as shown in
Figure 1-4
Examine the sequence of colored wires to determine the type of RJ-45 cable, as follows:
Straight-through—The colored wires are in the same sequence at both ends of the cable.
•
Crossover—The first (far left) colored wire at one end of the cable is the third colored wire at the
•
other end of the cable.
Table 1-1
Table 1-1
Signal Pin
-
-
-
-
-
-
-
-
OL-18362-01
RJ-45 Cable Identification
lists the rolled (console) cable pinouts for RJ-45.
RJ-45 Rolled (Console) Cable Pinouts
Pin Pin
1 8 -
2 7 -
3 6 -
4 5 -
5 4 -
6 3 -
7 2 -
8 1 -
Cisco ASA 5505 Adaptive Security Appliance Hardware Installation Guide
Figure 1-4.
Console Port (RJ-45)
1-3