Removing The Dimm - Cisco ASA 5505 Hardware Installation Manual

Chapter 4 Maintenance and Upgrade Procedures
This section describes how to remove and install the memory module on the adaptive security appliance.
This section includes the following topics:
•
•

Removing the DIMM

To remove the memory module, perform the following steps:
Determine the location of the memory sockets, see
Step 1
Figure 6
1
2
3
Step 2 Locate the wrist grounding strap and connect one end to the adaptive security appliance, and securely
attach the other to your wrist so it contacts your bare skin. See,
more information.
Note
OL-18362-01
Removing the DIMM, page 4-7
Installing the DIMM, page 4-8
System Memory Location in the Cisco ASA 5505
DIMM
CompactFlash
Battery
Handle the edges of the DIMM only; avoid touching the memory modules, pins, or traces (the
metal fingers along the connector edge of the DIMM), along the connector edge.
Figure
Cisco ASA 5505 Adaptive Security Appliance Hardware Installation Guide
Upgrading Memory
6.
1
2
3
"Working in an ESD Environment" for
4-7