Cisco ASA 5505 Hardware Installation Manual page 31

Chapter 3 Installing the Cisco ASA 5505
Step 7 Remove the three screws from the bottom of the Cisco ASA 5505 as shown in
Figure 3-12
Slide the ASA 5540 into the FIPS enclosure as shown in
Step 8
Figure 3-13
Turn the FIPS enclosure with the chassis securely inside and use the three screws you removed in Step 6
Step 9
to screw the FIPS enclosure to the Cisco ASA 5505.
Apply the second tamper evident label over the screw as shown in
Step 10
OL-18362-01
Removing the Screws
Sliding the Cisco ASA 5505 Chassis into the FIPS Enclosure
Cisco ASA 5505 Adaptive Security Appliance Hardware Installation Guide
Rack or Wall Mounting the Cisco ASA 5505
Figure
Figure 3-13.
5 5 0 5
SE RI ES
C IS C O A S A
nc e
cu rit y Ap pl ia
Ad ap tiv e Se
Figure 3-14.
3-12.
3-13