Ups Settings - Buffalo TeraStation User Manual

UPS Settings

An UPS (Uninterruptible Power Supply) can protect the TeraStation from power outages and brownouts. To use the
TeraStation with a UPS, proceed as follows:
1
Plug the power cable of the UPS to a wall socket.
2
Connect the AC cable of the TeraStation to the UPS.
3
Connect the UPS to the TeraStation with a USB or serial connection.
Note:
• TS-XEL series TeraStations do not have UPS Port.
4
Turn on the UPS, then the TeraStation.
5
In the Web Admin interface, click [System] - [Power Management] - [UPS Settings].
6
Click [Modify Settings].
7
Notes:
• If the UPS has shut down the TeraStation because of a power outage, make sure that power has been restored before
restarting the TeraStation. If the TeraStation is restarted after a shutdown, but power is not available, then the UPS
will not shut down the TeraStation a second time even if its battery is running low.
• If the TeraStation is set to use UPS recovery, then the UPS will restart the TeraStation when normal power is restored.
TeraStation User Manual
1
Check [Enable].
2
Configure the desired settings.
3
Click [Save].
66