Factory Defaults - Buffalo TeraStation User Manual

Factory Defaults

The following settings are factory defaults for the TeraStation.
Username
Password
Shared Folders
DHCP Client
Registered Group
Microsoft Network Group
Setting
Ethernet
Frame Size
AFP
FTP
NTP
PrintServer
WebAccess
Time Machine
TeraSearch
RAID Mode
Note:
To restore factory defaults, refer to "Initialization" on page 70.
TeraStation User Manual
admin
password
"share" (for both Windows and Macintosh computers). The recycle bin is set to
[Enabled] on "share" by default.
Normally, the TeraStation will get its IP address automatically from a DHCP server on
the network. If no DHCP server is available, then an IP address will be assigned as
follows:
IP Address: 169.254.xxx.xxx (xxx is assigned randomly when booting the TeraStation).
Subnet Mask: 255.255.0.0
The TeraStation has 3 default groups: "hdusers", "admin" and "guest".
You cannot edit or delete them.
WORKGROUP
1518 bytes
Enabled
Disabled
Automatic
Enabled
Disabled
Disabled
Disabled
RAID 5 mode for TS-XL, TS-XEL (4 hard drives)
RAID 5 mode for TS-RXL (4 hard drives)
RAID 1 mode for TS-WXL/R1
Normal mode for TS-WXL/1D
142