Buffalo TeraStation User Manual page 129

Network attached storage
Hide thumbs Also See for TeraStation:
Table of Contents

Advertisement

System-Backup
Local
TeraStations
View NAS Devices
Off Subnet
TeraStations
Password to
Search
Search for Backup
Destination by
Password
Click [Modify
Settings] to
change settings
TeraStation User Manual
Displays the list of the LinkStation/TeraStation (*) on the network.
Click [Refresh] to update the list with the latest information.
* Caution: Only the LinkStation/TeraStation which support Backup via the network will be
displayed.
To add a LinkStation or TeraStation which is not on the list, or is on another network,
enter its IP address and click [Add]. To remove a LinkStation or TeraStation from the list,
select it and click [Delete].
* Caution: Only the LinkStation/TeraStation which support Backup via the network can be
registered.
Enter this password when you want to specify the shared folders on another TeraStation
via the network as a backup destination. Enter the password to search for Backup which is
set for the shared folders of another TeraStation. If you do not enter it, you cannot backup
to the shared folders for which the authentication password has been set.
* Only enter a single password for [Search for Backup Destination by Password].
* The shared folder with different [ Remote backup password] cannot be set as a backup
destination as well.
* Searching backup destination shared folder by entering [Search for Backup Destination
by Password] is only available for TeraStation other than the backup source.
Steps for Setup
1. On the Web Admin interface of the backup destination, set [Remote backup password]
for each shared folder.
2. Set the same password for [Remote backup password] of a shared folder you want to
display as a backup destination as [Search for Backup Destination by Password] when
you configure backup for the backup source TeraStation.
3. Configure backup at the TeraStation which is the backup source.
Select the shared folders of the backup destination from followings.*
• Shared folders in the TeraStation which is the backup source.
• The USB hard drive connected to the TeraStation which is the backup source.
• A shared folder for which [Remote backup password] is not set in the TeraStation
which is the backup destination.
• A shared folder whose [Search for Backup Destination by Password] matches [Remote
backup password] of the TeraStation which is the backup destination.
* [Backup] must be enabled as a remote backup destination when setting up the
shared folder.
Example of Configuration
Configuration on the TeraStation (Backup Destination)
Shared folder name
Remote Backup Password
Example of Configuration
Configuration on the TeraStation (Backup Source)
The Backup destination shared folder which
is displayed when setting "111" to [Search
for Backup Destination by Password] for the
backup source TeraStation
The Backup destination shared folder which
is displayed when setting "222" to [Search
for Backup Destination by Password] for the
backup source TeraStation
A shared folder as a backup destination
displayed when the password is not set
share1
share2
111
222
View
Not
Displayed
Not
Displayed
share_free
None
Not
View
Displayed
View
View
Not
View
Displayed
128

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents