Buffalo TeraStation User Manual page 150

Examples of LCD
Chip Error
RTC Failure
Chip Error
SATA1 Failure
Chip Error
SATA2 Failure
Chip Error
USB Failure
Chip Error
Ethernet Failure
HDx Error
HDx Can't Mount
HDx Error
HDx Is Faulty
SATAx Error
COMM. Failure
Replication
Replicate Failure
* If you are using TS-RXL Series, LCD display with the height of 1 line contains 2 line's worth of information. You can scroll horizontally
to view it.
TeraStation User Manual
Meaning
E17 The circuit board is damaged. Unplug the power code of the TeraStation and reboot it. If the
error still persists, contact BUFFALO's service center for repair.
E18 The circuit board is damaged. Unplug the power code of the TeraStation and reboot it. If the
error still persists, contact BUFFALO's service center for repair.
E19 The circuit board is damaged. Unplug the power code of the TeraStation and reboot it. If the
error still persists, contact BUFFALO's service center for repair.
E20 The circuit board is damaged. Unplug the power code of the TeraStation and reboot it. If the
error still persists, contact BUFFALO's service center for repair.
E21 The circuit board is damaged. Unplug the power code of the TeraStation and reboot it. If the
error still persists, contact BUFFALO's service center for repair.
E22 Failed to mount the hard drive. Format the hard disk. After formatting, reboot the system.
If the error is still displayed, replace the hard disk. The error still persists, contact BUFFALO's
service center for repair.
E23 An error occurred and the Xth hard disk was removed from RAID array. Replace Xth hard
drive.
E24 An error occurred to communicate with the Xth hard drive.
Reboot the TeraStation. The error still persists, contact BUFFALO's service center for repair.
E26 The error occurred during Replication. Click [Resynchronize] under [System] - [Backup] -
[Replication] in the Web Admin interface. The error still persists, contact BUFFALO's service
center for repair.
149