Buffalo TeraStation User Manual page 72

Initialization from within the Web Amin interface
In the Web Admin interface, you can initialize the following settings, including things that are not initialized from the
reset button.
TeraStation Name, Description, NTP Settings, Workgroup Settings, Network Services, Shared Folders Settings, USB
Disk Settings, RAID Scanning, Timer ON/OFF, Upon restore, Restrictions on Shared Folders, User Settings, User/Group,
Notification Settings, Synchronization with UPS, Backup Settings, Admin password, Network Settings (IP Address,
Subnet Mask and etc.), Time Machine, Web Access, DFS, DirectCopy, NFS, TeraSearch, Alert Sound Settings, Front Panel
Settings, Language, Syslog, PrintServer, Network Services
1
In the Web Admin interface, navigate to [System] - [Restore/Erase]- [Restore Factory Defaults].
2
3
The [Confirm Operation] screen will open. Enter the number from the
seconds, then click [Apply].
4
Follow the instructions displayed on the screen.
Notes:
• To disable resetting the admin password from the reset button, navigate to [System] - [Restore/Erase] - [Restore
Factory Defaults]- [Modify Settings] and select [Keep current admin password]. Click [Save].
• If you disable resetting the admin password from the reset button, you can no longer configure the TeraStation if you
forget the password. Write down your password and keep it in a safe place.
TeraStation User Manual
Click [Restore TeraStation].
[Confirmation Number] field within 60
71