Operating Your Breville Variable Speed Blender - Breville BBL410XL Instruction Booklet

OPERATING
your Breville Variable Speed Blender

OPERATING YOUR BREVILLE VARIABLE SPEED BLENDER

BEFORE FIRST USE
Remove and safely discard any packaging
material and promotional labels.
Disassemble the blender by following steps
1 to 3 in "Disassembling the Blender".
Wash the lid, Integrated Measuring
Cup, blender jug, silicon seal and blade
assembly (refer to Disassembly instructions)
in warm, soapy water with a soft cloth.
Rinse and dry thoroughly. Wipe the motor
base with a damp cloth and dry thoroughly.
NOTE:
The blending blades are extremely
sharp. Avoid any contact with
fingers and hands.
ASSEMBLING AND ATTACHING
THE BLENDER JUG
Place the motor base on a flat, dry
1.
surface such as a bench top. Ensure
that the Speed Selection Dial is in the
'OFF' position and the power cord is
unplugged from the power outlet.
Place the blender jug upside down on
2.
a flat dry surface such as a bench top.
Place the silicon seal onto the base of
the blade assembly.
Hold the jug handle and place the blade
3.
assembly onto the base of jug, turn
in a clockwise direction until firmly in
position.
Turn the blender jug upright and place
4.
onto the motor base. The blender jug
handle can be positioned to the left or
the right of the appliance. Add food or
liquid into the blender jug ensuring not
to exceed the 'MAX' mark. Place the
blender lid firmly into position on the
top of the blender jug. Insert the
clear Integrated Measuring Cup into
the blender and turn until secured
into position.
NOTE:
when adding oil or other liquids
during the operation, turn the clear
Integrated Measuring Cup to the
unlocked position, remove it and
pour the oil or liquid through the
opening in the lid. The Integrated
Measuring Cup can be removed to
add ingredients or check the texture
of the ingredients.
11