Before First Use; Assembling And Attaching The Blender Jug; Operating Your Breville Power Blender - Breville BBL410 Manual

Operating Your Breville Power Blender

Before first use

Remove and safely discard any packaging material and
promotional labels. Disassemble the blender by following
steps 1 to 3 in "Disassembling the Blender". Wash the lid,
inner cup, blender jug, silicon seal and blade assembly
(refer to Disassembly instructions) in warm, soapy water
with a soft cloth. Rinse and dry thoroughly. Wipe the
motor base with a damp cloth and dry thoroughly.
NOTE
The blending blades are extremely sharp. Avoid any
contact with fingers and hands.
Assembling and attaching the
blender jug
1. Place the motor base on a flat, dry surface such as a
bench top. Ensure that the Speed Selection Dial is in
the 'Off' position and the appliance is switched off at
the power outlet and the power cord is unplugged.
. Place the blender jug upside down on a flat dry
surface such as a bench top. Place the silicon seal
onto the base of the blade assembly.
. Hold the jug handle and place the blade assembly
onto the base of jug, turn in a clockwise direction
until firmly in position.
4.
Turn the blender jug upright and insert onto the motor
base. The handle of the blender can be positioned to
the left or the right of the appliance. Add food or liquid
into the blender jug ensuring not to exceed the 'MAX'
mark. Place the blender lid firmly into position on the
top of the blender jug. Insert the clear inner cup into
the blender and turn until secured into position.
BBL410_IB_FA.indd 7
NOTE
When adding oil or other liquids during the operation,
turn the clear inner cup to the unlocked position and
pour through the hole in the lid. The inner cup can
be removed to add ingredients or check the texture
of the ingredients.
NOTE
The blender features a Breville Assist™ Lid. This
allows the lid to fit tightly onto the blender jug,
avoiding displacement during operation. The ring
pull design allows easy removal of the lid with a
simple leverage action.
.
Plug the power cord into a 230/240V power outlet
and switch on.
6. Ensure the blender is in the 'Off' position.
NOTE
Do not fill the blender jug above the 'MAX' line.
When the blender jug is filled at or near the 'MAX'
line place one hand on the blender lid to avoid
displacement of the lid during operation.
7
13/7/09 1:29:49 PM