Functional Description; Depth Adjustment - Makita 6807 Instruction Manual

FUNCTIONAL
DESCRIPTION
1
A
B
1. Locking sleeve
1
2
A
1. Approx. 1mm (3/64")
2. Locator
1
2
1. Approx. 1mm (3/64")
2. Locator
6
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.

Depth adjustment

003557
The depth can be adjusted by turning the locking sleeve.
Turn it in "A" direction for less depth and in "B" direction for
more depth. One full turn of the locking sleeve equals 1.5
mm (1/16") change in depth.
Adjust the locking sleeve so that the distance between the tip of
003558
the locator and the screw head is approximately 1 mm (3/64")
as shown in the figure. Drive a trial screw into your material or a
piece of duplicate material. If the depth is still not suitable for
the screw, continue adjusting until you obtain the proper depth
setting.
003559