Makita N5900B Instruction Manual page 7

ASSEMBLY
1
1. Shaft lock
2. Wrench
2
1
3
1. Hex bolt
2. Saw blade
3. Outer flange
4. Inner flange
1
1. Side grip
For tool without lock button
To start the tool, simply pull the switch trigger. Release the switch trigger to
stop.
CAUTION:
• Always be sure that the tool is switched off and unplugged before
carrying out any work on the tool.
Removing or installing saw blade
004326
CAUTION:
• Be sure the blade is installed with teeth pointing up at the front of the
tool.
• Use only the Makita wrench to install or remove the blade.
To remove the blade, press the shaft lock so that the blade cannot revolve and
2 use the wrench to loosen the hex bolt counterclockwise. Then remove the hex
bolt, outer flange and blade.
To install the blade, follow the removal procedure in reverse. BE SURE TO
004327
TIGHTEN THE HEX BOLT CLOCKWISE SECURELY.
The following blade can be used with the tool.
4
Side grip (auxiliary handle)
004328
Install the side grip on the tool securely before operation.
Max. dia.
235 mm
C00028
Min. dia.
230 mm
7