Makita N5900B Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Saw
  5. N5900B
  6. Instruction manual

Makita N5900B Instruction Manual

Hide thumbs Also See for N5900B:
Table of Contents

Advertisement

Quick Links

See also: Instruction Manual

Circular Saw

MODEL N5900B
I N S T R U C T I O N
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
DOUBLE
INSULATION
M A N U A L
004321

Advertisement

Table of Contents
loading

Related Manuals for Makita N5900B

Summary of Contents for Makita N5900B

  • Page 1: Circular Saw

    Circular Saw MODEL N5900B 004321 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

  • Page 2: Specifications

    SPECIFICATIONS Model N5900B Blade diameter 235 mm at 90° 85 mm Max. Cutting depth at 45° 60 mm at 50° 53 mm 4,100 No load speed (min Overall length 380 mm Net weight 7.0 kg Safety class • Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

  • Page 3: Safety Instructions

    SAFETY INSTRUCTIONS ENA001-2 WARNING: When using electric tools, basic safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock and personal injury. Read all these instructions before operating this product and save these instructions. 14.

  • Page 4: Additional Safety Rules For Tool

    ADDITIONAL SAFETY RULES FOR TOOL ENB036-4 Wear hearing protection. Keep Guards In Place and In Working Order. Never wedge or tie lower guard open. Check operation of lower guard before each use. Don’t use if lower guard does not close briskly over saw blade.
  • Page 5 14. Avoid Cutting Nails. Inspect for and remove all nails from lumber before cutting. 15. When operating the saw, keep the cord away from the cutting area and position it so that it will not be caught on the workpiece during the cutting operation.

  • Page 6: Functional Description

    FUNCTIONAL CAUTION: DESCRIPTION • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Adjusting depth of cut 004322 CAUTION: • Use a shallow depth of cut when cutting thin workpiece for cleaner, safer cutting.
  • Page 7 • Use only the Makita wrench to install or remove the blade. To remove the blade, press the shaft lock so that the blade cannot revolve and use the wrench to loosen the hex bolt counterclockwise. Then remove the hex bolt, outer flange and blade.

  • Page 8: Operation

    Joint set (Accessory) 004329 Attach the joint to the chip chute in the blade case and secure it with the screws. Remove the lever attached to the main unit and attach lever of joint set. 004330 OPERATION CAUTION: • Be sure to move the tool forward in a straight line gently. Forcing or twisting the tool will result in overheating the motor and dangerous kickback, possibly causing severe injury.

  • Page 9: Maintenance

    CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
  • Page 10 Memo...
  • Page 11 Memo...
  • Page 12 Makita Corporation Japan 884505-6...

Table of Contents