Wand Emulation Multi Block; Delay Between Blocks - Honeywell 4600g User Manual

The Code 39 Format barcode below sets the terminal ID to 61, and the Same
Code Format barcode sets the terminal ID to 64.
Wand Emulation
Same Code Format

Wand Emulation Multi Block

Note: See "Imager Models"
your imager.
Note: Changing secondary wand emulation settings also changes the primary
wand emulation settings (see

Delay Between Blocks

This sets the delay time between data blocks. Default = 50ms.
5ms
150ms
on page 6-1 to determine which interfaces apply to
Wand Emulation
Wand Emulation
Code 39 Format
on page 2-13).
* 50ms
500ms
6 - 3