Upc-A; Upc-A Number System - Honeywell 4600g User Manual

UPC-A

UPC-A
* On
UPC-A Check Digit
This selection allows you to specify whether the check digit should be transmit-
ted at the end of the scanned data or not. Default = On .
* On

UPC-A Number System

The numeric system digit of a U.P.C. symbol is normally transmitted at the
beginning of the scanned data, but the unit can be programmed so it will not
transmit it. Default = On.
* On
7 - 18
<Default All UPC-A Settings>
Off
Off
Off