NETGEAR WGR614v8 Reference Manual page 56

54 Mbps Wireless Router WGR614v8 Reference Manual
To configure the router from a Windows Vista PC:
1. If there is no check mark in the Allow a Registrar to Configure this Router checkbox, check
the radio box and click Apply.
2. On the Windows Vista PC, click the Network icon on your desktop to view a dialog that
displays your network devices.
3. From the Network dialog box, click the Add a wireless device menu button and follow the
instructions displayed by the Windows Vista registrar.
Once a Windows Vista PC has configured the router, the Allow a Registrar to Configure this
Router feature becomes inactive.
Figure 5-1
Note: The device name should be set to a name that is easy to identify in your
network. You can see this name in the Vista network map and network
explorer.
To add a WPS client using the built-in registrar:
1. Select Vista Settings under the Advanced section of the main menu. The Vista Settings screen
will display.
2. Select the Enable Built-in Registrar checkbox and click Apply. The Enable Built-in
Registrar will be enabled.
3. Click Add a Wireless Client. The dialog box will prompt you for the client's PIN which is
prompted from the client utility. (You should be able to view the client's PIN using the client's
configuration utility.)
4. Click Add. The Wireless Client will be added to your network
5-2
v1.0, July 2007
Advanced Router Configuration