NETGEAR WGR614v8 Reference Manual page 46

54 Mbps Wireless Router WGR614v8 Reference Manual
This screen shows the following parameters:
Table 4-1. Wireless Router Status Fields
Field
Account Name
Hardware Version
Firmware Version
Internet Port
MAC Address
IP Address
DHCP
IP Subnet Mask
DNS
LAN Port
MAC Address
IP Address
IP Subnet Mask
DHCP
4-2
Description
This field displays the Host Name assigned to the router.
This field displays the hardware version of the router.
This field displays the current router firmware version.
These parameters apply to the Internet (WAN) port of the router.
This field displays the Media Access Control address being used
by the Internet (WAN) port of the router.
This field displays the IP address being used by the Internet (WAN)
port of the router. If no address is shown, the router cannot connect
to the Internet.
If set to None, the router is configured to use a fixed IP address on
the WAN.
If set to Client, the router is configured to obtain an IP address
dynamically from the ISP.
This field displays the IP Subnet Mask being used by the Internet
(WAN) port of the router.
This field displays the Domain Name Server addresses being used
by the router.
These parameters apply to the Local (LAN) port of the router.
This field displays the Media Access Control address being used
by the LAN port of the router.
This field displays the IP address being used by the Local (LAN)
port of the router. The default is 192.168.1.1
This field displays the IP Subnet Mask being used by the Local
(LAN) port of the router. The default is 255.255.255.0
Identifies if the router's built-in DHCP server is active for the LAN
attached devices.
v1.0, July 2007
Maintenance