Viewing A List Of Attached Devices; Configuration File Management - NETGEAR WGR614v8 Reference Manual

Table 4-3: Router Statistics Items (continued)
Item Description
Up Time The time elapsed since this port acquired the link.
Poll Interval Specifies the intervals at which the statistics are updated in this window. Click on Stop
to freeze the display.
Set Interval Enter a time and click the button to set the polling frequency.
Stop Click the Stop button to freeze the polling information.

Viewing a List of Attached Devices

The Attached Devices menu contains a table of all IP devices that the router has discovered on the
local network. From the Main Menu of the browser interface, under the Maintenance heading,
select Attached Devices to view the table, shown below.
Figure 4-4
For each device, the table shows the IP address, NetBIOS Host Name (if available), and Ethernet
MAC address. Note that if the router is rebooted, the table data is lost until the router rediscovers
the devices. To force the router to look for attached devices, click the Refresh button.

Configuration File Management

The configuration settings of the Wireless Router are stored within the router in a configuration
file. This file can be saved (backed up) to a user's PC, retrieved (restored) from the user's PC, or
cleared to factory default settings.
Maintenance
54 Mbps Wireless Router WGR614v8 Reference Manual
v1.0, July 2007
4-5