Adding A Custom Service - NETGEAR WGR614v8 Reference Manual

1. From the Service & Game box, select the service or game that you will host on your network.
If the service does not appear in the list, refer to the following section,
Service" on page
2. Enter the IP address of the local server in the corresponding Server IP Address box.
3. Click the Add button.

Adding a Custom Service

To define a service, game or application that does not appear in the Services & Games list, you
must determine what port numbers are used by the service. For this information, you may need to
contact the manufacturer of the program that you wish to use. When you have the port number
information, follow these steps:
1. On the Port Forwarding/Port Triggering screen, click Add Custom Service.
Figure 5-6
2. Type the service name in the Service Name box.
3. Type the beginning port number in the Starting Port box.
• If the application uses only a single port; type the same port number in the Ending Port
box.
• If the application uses a range of ports; type the ending port number of the range in the
Ending Port box.
4. Type the IP address of the computer in the Server IP Address box.
5. Click Apply to save your changes.
Advanced Router Configuration
54 Mbps Wireless Router WGR614v8 Reference Manual
5-7".
v1.0, July 2007
""Adding a Custom
5-7