your Internet connection for servers and protocols to determine your ISP configuration. This
feature is not the same as the Smart Wizard on the Resource CD that is used for installation.
To use the Setup Wizard:
To go to the Setup Wizard screen, from the top of the main menu, select Setup Wizard.
1
Figure 4.
Select Yes for the Auto-Detect Connection Type, and then click Next to proceed.
2
Enter your ISP settings, as needed.
3
At the end of the Setup Wizard, click Test to verify your Internet connection. If you have
4
trouble connecting to the Internet, see
Viewing or Manually Configuring Your ISP Settings
To view or configure the basic settings:
Log in to the wireless modem router as described in
1
Modem Router
Select Basic Settings from the wireless modem router menu to display the Basic Settings
2
screen.
N300 Wireless Gigabit ADSL2+ Modem Router DGN3500
on page 8.
Connecting Your Router to the Internet
Chapter
7,
Troubleshooting
Logging In to Your N300 Wireless
10
.