NETGEAR DGN3500 User Manual page 84

Figure 51.
You can use this screen to specify access to the USB storage device. The following table
explains the fields and buttons in the USB Storage Advanced Settings screen.
Table 6-5.
Fields
Network Device Name
Workgroup
Access Method Network Connection
HTTP
HTTP (via Internet)
FTP
FTP (via Internet)
N300 Wireless Gigabit ADSL2+ Modem Router DGN3500
Description
The default is readyshare. This is the name used to access
the USB device connected to the wireless modem router from
your computer.
If you are using a Windows Workgroup rather than a domain,
the Workgroup name is displayed here.
Enabled by default, this allows all users on the LAN to have
access to the USB drive.
Disabled by default. If you enable this setting, you can type
http://readyshare to access the USB drive.
Disabled by default. If you enable this settings, remote users
can type http://readyshare to access the USB drive over the
Internet.
Disabled by default.
Disabled by default. If you enable this settings, remote users
can access the USB drive via ftp over the Internet.
USB Storage
85