GE ZET1 Installation Instructions Manual page 5

Installation Instructions
Cutout for
Cutout
Width
28 i/2"
{72,4 cm) Min,
_'- 28 518"
{72,7 cm} Max,
Allow 11/16"
(1.8cm) for
overlap of oven
over side edges of
cutout
Allow a minimum
of 21" (53.3 cm)for
clearance to adjacent
corners, drawers,
walls, etc. when
door is open
21" / _T----_-
(53.3 cm) -_"
Opening
Between
Inside Walls
Must Be
At Least
28 1/2"
{72.4 cm} Wide
Allow i" (2.5 cm)
minimum for
overlap of oven
top and 1¼"
(3,2 cm) overlap
oven bottom
of cutout
(76.2 cm_'-_
Cabinet ->
Width
Double
7 3/4"
{19,7 cm}
Junction Box
(131.6 cm) Min. J_
51 15/16" (131.8
cm) Max.
J
1 Recommended cutout
Jlocation from floor
12" (30.5 cm)
uilt-ln Oven
If the cabinet does not have a solid bottom, two
braces or runners must be installed level with
the bottom of the cutout to support the weight
of the oven. For double ovens, the runners and
braces must support 375 Ibs. {169 kg).
I_ NOTE: If marks, blemishes or the cutout Ill
III opening are visible above the installed III
III oven, it may be necessary to add wood Ill
III shims under the runners and front trim Ill
Ill until the marks or opening III
Location
/
47" (119.4 cm)
Min. to Bottom of
Jun tion Box
Cabinet Width 30" (76.2 cm)
Recommended
Cutout
Location
from Floor
Cutout Depth
Cutout Width
Cutout Height
12" {30.5 cm)
23 1/2" (59.7 cm) Min.
28 1/2" (72.4 cm) Min.
28 5/8" (72.7 cm) Max.
51 13/16" {131.6 cm) Min.
51 15/16" (131.8 cm) Max.
NOTE: If the cabinet does
not have a front flame and the
sides are less than 3/4" {1.9 cm)
thick, shim both sides equally
to establish the cutout width.
-- Install a
solid bottom
or 2" x 4"
(5 cm x 10 cm) or
equivalent runner
level with bottom
of cutout
Suitable
Bracing I
to Support 21 5/8"
Runners {54,9 cm)
_-'_ Over Centerline ---_-
of Cabinet
The solid bottom or runners must be level with
the bottom of the cutout, or the bottom trim
may not install correctly and then interfere
with the door opening.
5