Customizing Your Wireless Network; Using The Network Settings Options - NETGEAR WNHD3004 User Manual

This chapter describes how to configure advanced networking features of the
3DHD Home Theater Adapter WNHD3004, including LAN, WAN, and routing settings.
It contains the following sections:
• "Using the Network Settings Options" on page 5-1
• "Optimizing Wireless Performance" on page 5-3

Using the Network Settings Options

Use the Network Settings screen to configure LAN IP services such as IP address of the unit, and
the optional DHCP server.
By default, the IP address is assigned dynamically by the DHCP server in the network, typically
built in to the routers found in home networks. Without a router, the IP address of the unit
operating in AP mode defaults to 192.168.1.240 and when the unit is in bridge mode it defaults to
192.168.1.241.
To configure network settings, in the main menu of the browser interface, under Basic, select
Network Settings. The following screen displays:

Customizing Your Wireless Network

v1.0, November 2010
Chapter 5
5-1