Advertisement
6. Return to the Netgear genie screen and click the Next button.
NETGEAR genie displays a list of wireless networks in your area.
Standalone Driver Installation
1. Insert the resource CD in your computer CD drive.
Note:
If your computer does not have a CD drive, download the A6210
resource CD driver by visiting http://support.netgear.com. Click the
Support For Home Go button and enter A6210 in the search field.
If the Resource CD screen does not display, browse the files on the CD
and double-click Autorun.exe.
The NETGEAR Resource CD screen displays.
2. Click the Install Windows Standalone Driver button.
The driver installs on your computer.
3. When prompted, either place the adapter into the desktop dock and
connect the USB cable to a USB port on your computer or use the
adapter without the desktop dock and insert the adapter into a USB
port on your computer.
Note:
NETGEAR does not recommend that you use another cable to connect
the adapter to the USB port on your computer. Use the desktop dock with the
attached cable that is supplied in the package. Using another USB cable might
affect the performance and correct functioning of the adapter.
May 2014
Join a Wireless Network
You can join a wireless network from the NETGEAR genie, or you can use
Wi-Fi Protected Setup (WPS) if your wireless router supports it.
Join a Network Using NETGEAR genie
1. From the NETGEAR genie screen, click the Join a Network button.
2. Select your wireless network.
3. Click the Connect button.
4. If the network is secure, enter its password or network key.
The adapter joins the network, which can take a few minutes. Your
settings are saved in a profile.
Join a Network Using WPS
1. Press and hold the WPS button on the adapter for two seconds.
2. Within two minutes, press the WPS button on your wireless router or
gateway.
The adapter joins the network, which can take a few minutes. Your
settings are saved in a profile.
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
WPS button
Check Your Connection Status
When you install your adapter, the NETGEAR genie icon displays in the Windows
system tray and on the desktop. You can double-click this icon to open
NETGEAR genie to make changes or connect to a different wireless network.
The color of the icon indicates the strength of your wireless connection:
White. 3–5 bars (strong connection)
Yellow. 1–2 bars (weak connection)
Red. 0 (zero) bars (no connection)
If you remove your adapter, NETGEAR genie is not available, so the icon does
not display. When you insert the adapter again, the icon returns.
Support
Thank you for purchasing this NETGEAR product.
After installing your device, locate the serial number on the label of your
product and use it to register your product at https://my.netgear.com.
You must register your product before you can use NETGEAR telephone
support. NETGEAR recommends registering your product through the NETGEAR
website.
For product updates and web support, visit http://support.netgear.com.
NETGEAR recommends that you use only the official NETGEAR support
resources.
You can get the user manual online at
http://downloadcenter.netgear.com
through a link in the product's user interface.
For the complete EU Declaration of Conformity, visit
http://support.netgear.com/app/answers/detail/a_id/11621/.
For regulatory compliance information, visit
http://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered
trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries.
Information is subject to change without notice. © NETGEAR, Inc. All rights reserved.
or
Advertisement
