Access Point Mode Wps Setup - NETGEAR WNHD3004 User Manual

3DHD Home Theater Adapter WNHD3004 User Manual

Access Point Mode WPS Setup

These instructions will guide you through connecting the WNHD3004 to a router. Then, you will
connect wirelessly using WPS technology.
Internet
Router/gateway
Figure 2-1
1. Connect the Ethernet cable from a LAN port on your existing
router or gateway to an Ethernet port on the WNHD3004.
2. Connect the power adapter to the unit. Verify that the power light
is on.
You are finished with setting up the access point.
2-2
WNHD3004 
Access Point
v1.0, November 2010
Laptop with adapter like the NETGEAR
WNDA3100 USB Adapter
Setting Up Your Wireless Network
Power light
WPS button/
light