Connecting To The Wnhd3004; Connecting To Your Wnhd3004; Using Firmware Update - NETGEAR WNHD3004 User Manual

This chapter describes how to connect to your WNHD3004 and keep its firmware up to date. You
can use the Web Configuration Interface to manage your WNHD3004.
This chapter includes:
•

"Connecting to Your WNHD3004"

• "Using Firmware Update" on page 3-2
Connecting to Your WNHD3004
You can use a Web browser to log in to a WNHD3004 and view or change its settings. To access
the Web Configuration Interface:
1. Depending on how your WNHD3004 is connected, do one of the following:
a. If the WNHD300r is connected with an Ethernet cable, open the Web Configuration
Interface by typing http://IP_address_of_the_device in the address field of your browser,
and then pressing Enter.
b. If your PC is directly connected to the WNHD3004, type either 
http://www.mywifiext.net or http://www.mywifiext.net in the address field of your
browser, and then press Enter.

Connecting to the WNHD3004

v1.0, November 2010
Chapter 3
3-1