NETGEAR WNHD3004 User Manual page 18

3DHD Home Theater Adapter WNHD3004 User Manual
2. Connect the power adapter. The Power light should blink in green.
Figure 2-5
3. On the new WNHD3004, press the WPS button; its WPS light blinks. Within 2 minutes, press
the WPS button on the existing Wireless-N bridge that is operating in AP mode. Its WPS light
starts to blink.
After 1–2 minutes the new unit in Bridge mode should be associated with the existing unit in
AP mode. The WPS lights for the AP unit and the Bridge mode unit turn off. The Power lights
on both units are steadily on.
2-6
v1.0, November 2010
Setting Up Your Wireless Network