Section 4: Lathe Operations - Grizzly G0492 Owner's Manual

SECTION 4: LATHE OPERATIONS

Operation Safety
Damage to your eyes, lungs, and ears could
result from using this machine without
proper protective gear. Always wear safety
glasses, a respirator, and hearing protection
when operating this machine.
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving
machinery.
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY REC-
OMMEND that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. Regardless of the con-
tent in this section, Grizzly Industrial will
not be held liable for accidents caused by
lack of training.
NOTICE
Complete the Test Run & Break-In proce-
dure on Page 16 before using this lathe/mill
for any cutting or threading operations; oth-
erwise, gear box damage will occur.
The Power Supply
Note: The Spindle Rotation ON/OFF Lever
(Figure 8) on the apron starts the spindle motor
in a particular direction.
TURN OFF and LOCK your master power
switch so no power is available to the lathe/
mill, and make sure the spindle is stopped
before proceeding with any adjustments or
maintenance. Failure to comply may result
in serious personal injury or death.
Figure 6.
Figure 6