Section 4: Operations; Operation Overview - Grizzly G0971 Owner's Manual

SECTION 4: OPERATIONS

Operation Overview

The purpose of this overview is to provide the
novice machine operator with a basic understand-
ing of how the machine is used during operation,
so the machine controls/components discussed
later in this manual are easier to understand.
Due to the generic nature of this overview, it is
not intended to be an instructional guide. To learn
more about specific operations, read this entire
manual, seek additional training from experienced
machine operators, and do additional research
outside of this manual by reading "how-to" books,
trade magazines, or websites.
To reduce your risk of
serious injury, read this
entire
using machine.
DO NOT start machine until all preceding
setup instructions have been performed.
Operating an improperly set up machine
may result in malfunction or unexpect-
ed results that can lead to serious injury,
death, or machine/property damage.
If you are not experienced with this type
of machine, WE STRONGLY RECOMMEND
that you seek additional training outside of
this manual. Read books/magazines or get
formal training before beginning any proj-
ects. Regardless of the content in this sec-
tion, Grizzly Industrial will not be held liable
for accidents caused by lack of training.
-20-
manual BEFORE
This machine is designed for cold rolling
only. Using a torch or other means for hot
rolling will permanently damage and deform
the rollers and frame of this machine.
Sample Illustration
Throughout this manual, diagrams are used to
illustrate how the components of the machine are
used during the various steps of operation.
Familiarize yourself with the following illustration,
its relationship to the machine, and the symbols
used in it before proceeding through this manual.
Front
CCW
Bold, solid lines indicate that this
component is used in this step.
Light, dashed lines indicate that this
component is not used in this step.
Arrows indicate the direction of
movement of a component.
Rotational arrows indicate the direction a
CW
component must be turned.
CW=Clockwise
CCW
CCW=Counterclockwise
Footprints indicate which foot switch
pedal must be pressed.
R=Reverse
F=Forward
Model G0971 (Mfd. Since 11/23)
Rear