Table of Contents
Advertisement
Cutting Shallow
Tapers with
Tailstock
To setup the tailstock to cut tapers:
1.
2.
20
3.
Note: To return the tailstock back to the
original position, repeat the process until the
centered position is indicated on the scale.
Figure 19.
Figure 20.
Aligning Tailstock
To align the tailstock:
1.
Figures 19
2.
3.
4.
Figure 21.
Figure 21 .
Note: As long as the dead center remains in
the chuck, the point of your center will remain
true to the spindle axis. Keep in mind that the
point will have to be refinished whenever it is
removed and returned to the chuck.
Step 6.
Advertisement
Table of Contents
