Table of Contents
Advertisement
Using the Manual
Feed Handwheels
Figure 30
S
Figure 30.
Longitudinal Handwheel
Cross Slide Handwheel
Compound Rest Handwheel
Setting the Spindle
RPM
To determine and set the needed spindle
RPM for cutting:
1.
Figure 31
Cutting Speeds for High Speed Steel
(HSS) Cutting Tools
Note: For carbide cutting tools, double the
cutting speed. These values are a guide-
line only.
HANDBOOK
Figure 31.
Failure to follow RPM and feed rate guide-
lines may threaten operator safety from
ejected parts or broken tools.
MACHINERY'S
Advertisement
Table of Contents
