Reserved Ip Addresses; Configuring Dynamic Dns - NETGEAR RangeMax WPN824v3 User Manual

RangeMax Wireless Router WPN824v3 User Manual

Reserved IP Addresses

When you specify a reserved IP address for a computer on the LAN, that computer always
receives the same IP address when it access the router's DHCP server. Reserved IP addresses
should be assigned to servers that require permanent IP settings.
To reserve an IP address:
1. Log in to the wireless router (see
LAN IP Setup.
2. In the Address Reservation section on the LAN IP Setup screen, click Add.
3. In the IP Address field, type the IP address to assign to the computer or server.
Choose an IP address from the router's LAN subnet, such as 10.1.1.x.
4. Type the MAC address of the computer or server.
Tip: If the computer is already present on your network, you can copy its MAC
address from the Attached Devices screen and paste it here.
5. Click Apply to enter the reserved address into the table.
Note: The reserved address will not be assigned until the next time the computer
contacts the router's DHCP server. You can reboot the computer, or access its
IP configuration, to force a DHCP release and renew.
To edit or delete a reserved address entry:
1. In the Address Reservation table on the LAN IP Setup screen, select the radio button next to
the reserved address you want to edit or delete.
2. Click Edit or Delete.

Configuring Dynamic DNS

If your network has a permanently assigned IP address, you can register a domain name and have
that name linked with your IP address by public Domain Name Servers (DNS). However, if your
Internet account uses a dynamically assigned IP address, you will not know in advance what your
5-10
"Logging In to the Wireless Router" on page
v1.0, January 2008
1-2, and select
Advanced Settings and Features