Using Automatic Firmware Update Upon Login - NETGEAR RangeMax WPN824v3 User Manual

Using Automatic Firmware Update upon Login

The Checking for Firmware Updates screen displays when you log in unless you previously
cleared the Check for Updated Firmware Upon Log-in check box in the Router Upgrade screen
(see "Router Upgrade" on page
Figure 1-2
1. Allow the router to check for firmware updates more recent than the firmware currently
installed in your wireless router.
One of the following messages displays, depending on whether or not there is newer firmware:
New firmware is available.
Figure 1-3
2. To download and install a newer version of firmware, click Yes.
The update feature automatically installs the most recent firmware.
Warning: Do not try to go online, turn off the router, shut down the computer, or do
Connecting to the Internet
RangeMax Wireless Router WPN824v3 User Manual
4-12).
anything else to the router until the router finishes downloading!
v1.0, January 2008
There is no new firmware.
1-3