NETGEAR WPN824N - RangeMax Wireless-N 150 Router Installation Manual

RangeMax Wireless-N 150 Router
®
WPN824N
Package Contents:
Wireless-N 150 Router
WPN824N
Resource CD
Wireless-N Router
Ethernet Cable Power Adapter
Step 1:
Installation Guide
Connect your modem.
Internet
CAUTION:
MAKE SURE YOUR MODEM IS
TURNED OFF OR UNPLUGGED
BEFORE STARTING THE
INSTALLATION.
Step 2:
Connect your router.
DSL or Cable
Modem
Step 4:
Power on your modem.
Wait until your modem cycles on
(approximately 2 minutes).
Note: If you have a battery-backed modem,
press the reset button. (In some cases, you may
need to remove, then re-insert, the battery to recycle
your modem.)
Step 3:
Connect your computer.
WiFi
On/Off
(not included)
Power
On/Off
Wireless-N Router
Step 5:
Power on your router.
Wait until the test LED
turns off.
Laptop or Desktop
Computer
Wireless-N 150 Router
WPN824N
Resource CD
Step 6:
Insert your CD.
Click Setup and follow
the steps to set up a secure
wireless network.
Note: If your laptop does not have a
CD drive, see "No CD Drive" Installation
on the back to complete your router setup.