NETGEAR RangeMax WPN824v3 User Manual page 78

RangeMax Wireless Router WPN824v3 User Manual
3. In the Priority Category list, select MAC Address. The QoS Priority Rules screen changes:
Figure 5-15
4. If the device to be prioritized is in the MAC Device List, select it. The information from the
MAC Device List is used to populate the policy name, MAC Address, and Device Name
fields. If the device is not in the MAC Device List, click Refresh. If it is still not there, you
must complete these fields manually.
5. From the Priority drop-down list, select the priority that this device's traffic should receive
relative to other applications and traffic when accessing the Internet. The options are Low,
Normal, High, and Highest.
6. Click Apply to save this rule to the QoS Policy list and return to the QoS Setup screen.
7. In the QoS Setup screen, select the Turn Internet Access QoS On check box, and then click
Apply.
Editing or Deleting an Existing QoS Policy
To edit or delete an existing QoS policy:
1. Open the QoS Setup screen, shown in
2. Select the radio button next to the QoS policy to be edited or deleted.
3. Do either of the following:
• Click Delete to remove the QoS policy.
• Click Edit to edit the QoS policy. Follow the instructions in the preceding sections to
change the policy settings.
4. Click Apply in the QoS Setup screen to save your changes.
5-22
Figure 5-11 on page
v1.0, January 2008
5-18.
Advanced Settings and Features