Carrying Tool - Makita LS1211 Instruction Manual

Carrying
tool
Make sure that the tool isunplugged. Secure
the blade
a t
0" bevel angle and the turn
base a t
60"
miter angle to the right. Secure
the slide pole after pulling the carriage to-
ward
you
fully. Lower the handle fully and
lock
it
in the lowered position by hooking
the chain to the screw on the motor hous,
ing. Carry the tool by holding both sides of
the tool base as shown in the figure. If you
remove the holders, dust bag, vise, tec., you
can carry the tool more
easily.
CAUTION
:
Always secure all moving portions before carrying the tool
21