Buffalo AirStation HighPower WBMR-HP-GNV2 User Manual page 9

Chapter 1 Product Overview
*1 Turn off AirStation first, wait for a few seconds, then turn it back on.
*2 If the Power LED keeps blinking, do not turn off the AirStation nor unplug its power
cable.
2
Security LED (Amber)
Indicates security status.
Off :
On :
2 blinks :
Blinking :
Note : The Security LED is lit if an encryption key has been set.
3
Wireless LED (Green)
Indicates wireless LAN status.
On :
Off :
4
DSL LED (Green)
Indicates DSL status.
On :
5
Internet LED
Indicates Internet status.
On (Green) :
Blinking (Green) :
On (Red) :
Off :
6
DC Connector
Connect the included AC adapter here.
7
LAN LED (Green)
On :
Blinking :
8
LAN Port
Connect your computer, hub, or other Ethernet devices to these ports. This switching hub
supports 10 Mbps, 100 Mbps connections.
9
DSL Port
Connect your ADSL line to this port.
WBMR-HP-GNV2 User Manual
AOSS or Encryption is not set.
AOSS/WPS activated; accessed to exchange security keys.
Encryption has been set.
The unit is waiting for an AOSS or WPS security key.
AOSS/WPS error; failed to exchange security keys.
Wireless LAN is transmitting.
Wireless LAN is not active.
The DSL port is connected.
Connected to Internet
Communicating over Internet
Not connected to Internet
Operating in bridge mode
An Ethernet device is connected.
An Ethernet device is communicating.
8