Buffalo AirStation HighPower WBMR-HP-GNV2 User Manual page 37

Chapter 4 Configuration
Parameter
Wireless Radio
Wireless Channel
150 Mbps Mode
Broadcast SSID
[Use Multi Security function]
[Do not use Multi Security function]
SSID1
SSID2
SSID3
SSID4
Separate feature
SSID
Wireless authentication
WBMR-HP-GNV2 User Manual
Meaning
Determines whether to allow wireless communication. If this is
unchecked, then no wireless connections will be allowed.
Sets a channel (a range of frequencies) used for wireless
connections. With Auto Channel selected, the AirStation will
automatically use the best available channel.
150 Mbps mode is a method to increase wireless transmission
throughput to 40 MHz per channel. To use 150 Mbps mode, set the
Bandwidth to 40 MHz and choose an Extension Channel.
Note: If using Auto Channel for the wireless channel, then the Extension
Channel is set automatically.
If [Allow] is checked, then the AirStation will respond to SSID
searches from wireless devices by broadcasting its SSID. If [Allow] is
unchecked, then the AirStation ignores SSID searches from wireless
devices.
Clicking [Use Multi Security function] will enable Multi Security,
allowing the use of multiple SSIDs, each with different wireless
security settings. Clicking [Do not use Multi Security function] will
disable the Multi Security function. The AirStation will then allow
one SSID and one type of wireless security.
Always enabled and supports all wireless encryption types.
Encryption can be disabled.
Always enabled and supports all wireless encryption types.
Encryption can be disabled.
SSID3 can use WPA-PSK-AES encryption.
SSID4 can use WEP encryption.
When [use] is enabled, wireless devices connected to the AirStation
can communicate only with the Internet side, not with each other.
Set SSID using 1-32 alphanumeric characters.
Specifies an authentication method used when connecting to a
wireless device.
36