Buffalo AirStation HighPower WBMR-HP-GNV2 User Manual page 27

Chapter 4 Configuration
Parameter
Internet Setup
Encapsulation
Modulation
Multiplexing
QoS Type
PCR Rate
SCR Rate
Auto Detect
Virtual Circuit
Obtain an IP Address
Automatically(DHCP)/Use following
IP Address
Internet IP Address
Subnet Mask
Gateway
Primary DNS / Second DNS
Service Name
WBMR-HP-GNV2 User Manual
Meaning
Set the ADSL communication method.
Set the modulation system used in ADSL communication.
Set the encapsulation system for VC multiplexing.
Select from LLC (Logical Link Control Encapsulation) which can
handle multiple protocols or VC (Virtual Circuit) for a single
protocol.
Set the QoS (Quality of Service).
Select from the three service categories (UBR, CBR, VBR) where the
QoS is guaranteed in the band.
Set the PCR (Peak Cell Rate) when CBR or VBR is selected for QoS
Type. The network upper limit transfer speed is set in the range
from 1 to 65534 cps.
Set the SCR (Sustainable Cell Rate) when CBR or VBR is selected
for QoS Type. The network sustainable transfer speed is set in the
range from 1 to 65534 cps.
Set to VPI (Virtual Path Identification) or VCI (Virtual Channel
Identification) of the virtual circuit when Disable is selected for
Auto Detect.
Set automatic detection of the virtual circuit.
This option is displayed when RFC1483 Bridged is selected in the
Encapsulation field.
Select whether the IP address, subnet mask, gateway, and DNS are
obtained automatically or manually.
Set the "public" (or "global") IP address that identifies your
broadband gateway on the Internet.
Set the Internet subnet mask.
Set the Gateway address specified by the provider.
Set the DNS server address specified by the provider.
Set the service name specified by the provider in 64 or less single-
byte alphanumeric characters.
26