Buffalo AirStation HighPower WBMR-HP-GNV2 User Manual page 17

Chapter 3 Installation
5
Turn on the AirStation, wait one minute, and then turn on your computer.
1) Connect the power supply
power outlet
6
Once your computer has booted, the AirStation's LEDs should be lit as described below:
POWER
WIRELESS
DSL
INTERNET
LAN
For LED locations, refer to chapter 1.
7
Launch a web browser. If the [home] setup screen is displayed, setup is complete.
If a user name and password screen is displayed, enter [root] (in lower case) for the user
name, leave the password blank, and click [OK]. Step through the wizard to complete setup.
You've completed initial setup of your AirStation. Refer to Chapter 4 for advanced settings.
WBMR-HP-GNV2 User Manual
AirStation
Green light on.
Green light on or blinking.
Green light on or off depending on your network.
Green light on.
Green light on or blinking.
ON
computer
16