Buffalo AirStation HighPower WBMR-HP-GNV2 User Manual page 16

Chapter 3 Installation
3
Connection for the AirStation to the ADSL line varies by country and region. Typically it
involves a microfilter or a microfilter with built-in splitter to allow simultaneous use of ADSL
service and telephone service on the same telephone line. Please read the following steps
carefully and select the appropriate method.
· If your telephone service and ADSL service are on the same telephone line, ADSL microfilters are needed
for each telephone and device, such as answering machine, fax machine, and caller ID display. Additional
splitters may be used to separate telephone lines for telephone and Router.
Note: Do not connect the ADSL microfilter between the wall jack and the Router—this will prevent ADSL
service from reaching the modem.
· If your telephone service and ADSL service are on the same telephone line and you are using an ADSL
microfilter with built-in splitter, connect the splitter to the telephone wall jack providing ADSL service. Then,
connect the telephone cord from the ADSL microfilter RJ11 port generally labelled 'DSL' to the gray RJ11
port labelled 'DSL line' on the back of your Router. Connect the telephony device to the other port on the
ADSL splitter commonly labelled 'Phone' .
Note: An RJ11 telephone cord is supplied. When inserting an RJ11 plug, be sure the tab on the plug clicks
into position correctly.
· If you have a dedicated ADSL service telephone line with an RJ11 wall jack, simply connect a telephone cord
from the wall jack to the DSL port on the back of the AirStation.
· If you have an RJ45 wall jack for your ADSL service, connect an RJ45-to-RJ11 converter to the wall jack. Then
connect one end of the telephone cord to the converter and the other end to the DSL port on the back of
the AirStation.
4
Connect your computer to one of the AirStation's LAN ports with the LAN cable.
WBMR-HP-GNV2 User Manual
AirStation
1) connect
2) connect
LAN cable
OFF
computer
15